|
Polyvinyl Chloride
(PVC #930)
Kentain 3/32" PVC #930 is practically
free from deterioration due to aging, sunlight, ozone
and other strong oxidizing agents such as potassium
permanganate, chromic acid, hydrogen peroxide, etc.
It is sulphur-free so it can be used with brass, silver,
etc. PVC #930 is non-moisture absorbent and practically
odourless. It is homogenous so there can be no ply separation.
It will soften in temperatures above 150°F.
Specifications
| Colour |
Aqua |
| Thickness |
93 Mil (3/32") |
| Formulation |
Pigmented Polyvinyl Chloride using highest quality
stablilizers and plasticizers for the ultimate in
chemical resistance. |
Physical Properties
ASTM D638 Tensile Strength (psi):
2200
ASTM D638 Elongation (%): 350
ASTM D676 Durometer: 78
Dimensional Stability (%): -3.0
Activated Carbon 24 hrs. @ 87(°C), Volatility (%):
4.0
ASTM D149 Dielectric Strength: 450 v/mil
ASTM D570 Water Absorption (%): .02
(30 min. at 212 °F)
ASTM D1505 Specific Gravity: 1.24
ASTM D746 Low Temp. Impact (°F): -25
Recommended for use with the following plating solutions:
Chromium, Nickel, Brass, Cadmium, Copper, Gold, Silver,
Lead, Indium, Tin, Rhodium & Zinc.
Because every service condition is different,
we recommend you do an actual in-plant test or contact
Kentain Products Ltd. giving detailed information, for
our recommendations.
The information on this
page is, to the best of Kentain's knowledge, true and
accurate. In some instances the temperature can exceed
that specified without detrimental liner damage but
may decrease the life expectancy.
|
