Polyvinyl Chloride (PVC #405)

•	PVC #405 is flexible, durable, long-lasting and pinhole free
•	The highest quality of plasticizers and stabilizers are used
•	Highly resistant to chemical attack and heat
•	Suitable for lining plating tanks
•	Unaffected by expansion and contraction
•	Will withstand a wide range of solutions

Specifications

Physical Properties
ASTM D882 Tensile Strength (psi): 2200
ASTM D882 Elongation (%): 300
ASTM D-1004 Tear Resistance (lbs./in.): 300
Dimensional Stability (%): -3.0
(30 min. at 212 °F)
Specific Gravity: 1.22
Low Temp. Impact (°F): -30
(Masland)
Service Temp. Range: -30 to 150°F

Suggested for use in the low to medium temperature range. Has excellent resistance to chemicals but poor resistance to ultra-violet rays and therefore not recommended for use in direct sunlight.

Because every service condition is different, we recommend you do an actual in-plant test or contact Kentain Products Ltd. giving detailed information, for our recommendations.

The information on this page is, to the best of Kentain's knowledge, true and accurate. In some instances the temperature can exceed that specified without detrimental liner damage but may decrease the life expectancy.